Intel R2000WT, Руководство по системной интеграции и обслуживанию

Страница: 32 / 140

Intel
®
Server System R2000WT Product Family System Integration and Service Guide
16
Intel® Server Chassis R2312WTxxx Only
The following cable connections apply to the Intel® Server Chassis R2312WTxxxx only.
This system includes rack handles with integrated USB, System Control Buttons, and various LED features
that must be cabled to the appropriate connectors on the server board. Cables from each rack handle are
pre-routed into the chassis requiring that they only be connected to the server board when installed.
Figure 15. R2312WTxxx Front Control Panel and Front I/O Internal Cable Connections
•
Locate the Gray 10-pin flat ribbon cable pre-routed on the left inner side wall of the chassis
• Connect this cable to the Black 10-pin connector located near the left edge half way towards the back of
the server board labeled “Front Panel USB 2.0”
•
Locate the Gray high density 30-pin cable pre-routed to the right inner side wall of the chassis
• Connect this cable to the White 30-pin connector on the right front corner of the server board labeled
“Storage Front Panel”