Intel R2000WT, Руководство по системной интеграции и обслуживанию

Страница: 30 / 140

Intel
®
Server System R2000WT Product Family System Integration and Service Guide
14
Install 8 x 3.5” Front Drive Bay Module into Chassis
Figure 12. 8x3.5" Front Drive Bay Module Installation
• Remove the bottom four drive trays from the drive bay module
•
Slide the 8 x 3.5” Front Drive Bay module into the front of the chassis (see letter ‘A’)
• Push the drive bay module in far enough so that the screw holes on the top of the drive bay are properly
aligned
•
Using 8 fastener screws, secure the drive bay module to the chassis (8 in/lbs torque) (see letter ‘B’)
• Locate the drive bay retention clip
Figure 13. 8x3.5" Front Drive Bay Retention Clip Installation
•
Slide the drive bay retention clip over the bottom edge of the drive bay assembly as shown in the
illustration. The retention clip should clamp together the bottom of the drive bay module to the chassis
base.