Intel R2000WT, Руководство по системной интеграции и обслуживанию

Страница: 64 / 140

Intel
®
Server System R2000WT Product Family System Integration and Service Guide
48
•
Route the SATA cable to the back of the optical drive bay
NOTE: All cables in the system that need to be routed front-to-back or back-to-front, should be routed using
the cable channels along each chassis sidewall. No cables should be routed through the center of the
system.
•
If installed, remove the optical drive bay filler plate from the chassis
Figure 61. Optical Drive Installation
•
Push the optical drive into the drive bay until it snaps and locks into place (see letter ‘A’)
• Connect the power and SATA cables to the optical drive as shown (see letter ‘B’)