Intel R2000WT, Руководство по системной интеграции и обслуживанию

Страница: 83 / 140

Intel
®
Server System R2000WT Product Family System Integration and Service Guide
67
Remove the standard rack handles
• Remove the three screws holding each rack handle to the chassis
Remove drive bay retention bracket, 1st drive bay module, and I/O bay
module
• Remove the 6 fastener screws from the top front edge of the drive bay (See Letter ‘A’) and pull out the
metal bracket (see letter ‘B’)
•
Remove fastener screws over the 1st (left most) drive bay module and I/O Bay Module (see letter ‘C’)
• Carefully place the chassis on its side.
•
From the bottom of the chassis, remove the fastener screw securing 1st (left most) drive bay module, the
I/O Bay Module, and drive bay filler panel (if installed) (see letter ‘D’)
•
Carefully return the chassis to its original position
•
Slide out the 1st (left most) drive bay module and drive bay filler panel (if installed) and the I/O Bay
Module
Install the storage rack handles