Intel M20NTP1UR, Руководство по системной интеграции и обслуживанию

Страница: 68 / 114

Intel® Server System M20NTP1UR - System Integration and Service Guide
68
6.8 OCP* Module Replacement
This section provides instructions for OCP* module replacement.
Required Tools and Supplies
•
OCP* Mezzanine Ethernet Network Adapter
• OCP* module mounting screws – 4x screws included with the system
•
Anti-static wrist strap and conductive workbench pad (recommended)
• Phillips* head screwdriver
1. Power off the system and disconnect all cables from the back of the system.
2. Remove the system top cover (see Section 6.1.1 )
3. Remove the Air Duct (see Section 6.2.1 ).
4. Remove the riser card assembly (see Figure 76 ).
5. Extract the OCP* Module from the system (See Figure 82 )
Figure 82. OCP* Module Removal
•
Remove the four screws securing the OCP* module to the server board (see Letter “A”).
• Carefully lift the back edge of the OCP* module until the connectors are free (see Letter “B”).
•
Gently pull the OCP* module away from the system back panel
Note : If the OCP* module is not being replaced, then the OCP* module mounting bracket, attached to the
system back panel must be replaced with the original OCP* bay cover plate to ensure the system remains
compliant to EMI/EMC regulatory certifications.