Intel M20NTP1UR, Руководство по системной интеграции и обслуживанию

Страница: 36 / 114

Intel® Server System M20NTP1UR - System Integration and Service Guide
36
Note : A small plastic bag taped within new drive blanks will include the four (4) screws necessary to mount a
2.5” SSD to the mounting bracket.
Figure 33. 2.5” SSD Mounting Bracket Assembly
• Install and secure the SSD to the drive bracket using two screws (See Letter “D”).
4. Install the SSD assembly into the drive carrier (See Figure 34 )
Figure 34. 3.5" Drive Carrier to 2.5” SSD Bracket – Mount Bracket Assembly to Carrier
•
Orient the SSD so that its interface connector is positioned towards the back of the drive carrier.
• Align and position the mounting holes on the left side of the SSD assembly over the mounting
tabs located on the left side rail of the drive carrier (See Letter “E”)
• Lower the right side of the SSD assembly into the drive carrier and press down until all mounting
tabs lock in place. (See Letter “F”)