Intel M20NTP1UR, Руководство по системной интеграции и обслуживанию

Страница: 78 / 114

Intel® Server System M20NTP1UR - System Integration and Service Guide
78
9. Carefully dis-assemble the PHM (See Figure 98 )
Figure 98. PHM Disassembly
•
While holding down the PHM, rotate the lever (see Letter “A”) clockwise until the processor
lifts free from the processor carrier clip.
•
While holding down the edges of the processor carrier clip, carefully lift out the processor (see
Letter “B”).
10. Return the lever to its original position and detach the processor carrier clip from the heat sink. (See
Figure 99 )
Figure 99. Processor Carrier Clip Removal from PHM Assembly
• Unlatch the hook on each corner of the processor carrier clip and lift it from the heat sink
(see Letter “D”).
To properly reassemble the PHM and install it onto the server board, the procedures described in the
following steps must be followed in the order specified. These instructions assume that the processor heat
sink (New or reuse of existing) has the necessary Thermal Interface Material (TIM) (DOWSIL* TC-5888)
already applied.
Note: Full ESD precautions should be followed to perform reassembly of the PHM and reinstallation of the
PHM to the server board. At no time should the processor itself be handled.