Intel M20NTP1UR, Руководство по системной интеграции и обслуживанию

Страница: 66 / 114

Intel® Server System M20NTP1UR - System Integration and Service Guide
66
• Remove the screw that secures the add-in card to the riser card bracket (see Letter “A”).
•
Carefully remove the add-in card from the riser card (see Letter “B”).
6. Remove the riser card from the riser card bracket (See Figure 78 )
Figure 78. Riser Card Removal from Bracket
•
Remove the two screws that secure the riser card to the bracket (see Letter “A”).
• Remove the riser card from the bracket (see Letter “B”).
7. Locate and unpack the replacement riser card
8. Install the riser card to the riser card bracket (See Figure 79 )
Note : The riser cards are not interchangeable between the riser card slots on the server board. Riser card
slots on the server board are matched to a specific riser card type. Ensure the replacement riser card
matches the one that was removed.
Figure 79. Riser Card Installation
•
Align the riser card mounting holes with the standoffs on the bracket (see Letter “A”).
• Using two screws, secure the riser card to the bracket (see Letter “B”).
9. Reinstall the PCIe* add-in card into the riser card (See Figure 80 )
Figure 80. PCIe* Add-in Card Installation
•
Insert the add-in card until it is fully seated inside the PCIe* slot on the riser card (see Letter “C”).