Intec ColorCut SC5000 Series, Руководство пользователя

Страница: 74 / 89

Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................... Page No: 74
14
The Media Positioning
14
control is typically set to “AutoSheet Feeder”. In this
mode, each time you click Start or Scan QR
Code , the SC5000 will automatically load a sheet
of media from the auto-sheet feeder using the
settings you pre-set under the PRODUCTIVITY
button.
In most cases you will not need to alter this
behaviour.
When using colored material that may not be
a standard size where you simply wish to cut
shapes or lettering on it, you may wish to switch
the cutter into the Manual mode.
The “
Manual
” positioning mode allows users to
place non-standard sizes of media Manually in
to the SC5000 from the front.
(Typically this may be used for cutting Vinyl
lettering, on sheets of colored vinyl).
The manually positioned mode is for unique or custom sized sheets which are not
printed and therefore will not have any PageMARKs or QR codes on them.
To use the SC5000 in Manual media positioning mode;
1
.
Set “SCAN TARGETS” is set to NO
within the SETTINGS options. (Section
9.2 in this manual)
2
.
Switch the cutter to the MOVE
3b
mode
on the SC5000 LCD Panel and Manually
load a sheet from the front, using the
RIGHT arrow key ( ⑦ ).
3
.
Use the MOVE mode and the arrow
keys to move the tool carriage to the
position on your media where you wish
to start cutting.
4
.
When the Tool Carriage is where you
want cutting to start, press the [ENTER]
key 2x, to set the ORIGIN.
Now select “ Manual ” under media
positioning and send your cut file for cutting.
If “SCAN TARGETS” is set to YES within the SETTINGS options.
“Manual” positioning option will be greyed out.
10.14 Media Positioning (AutoFeed / Manual Feed)
Off/Line ENTER
 
X:
125.5
mm
 
Y:
SET
ORIGIN


OFF-LINE
SC5000
B
89.7
mm
④
⑥
⑤
⑦
⑧
2f
3b
SC5000
Media