Intec ColorCut SC5000 Series, Руководство пользователя

Страница: 48 / 89

Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................... Page No: 48
9.1.1 Choosing the correct Blade for the job
Each packet of Intec Blades shows the Knife Offset on the front of the packet.
Nominally the standard Yellow, Red and Blue blades that are 1mm, use a 0.25mm
Knife offset, while the 1.4mm larger Circlip blades use a 0.75mm Knife Offset.
Remember to check and set the Knife Offset when changing blades.
Click the [
SETTINGS
]
button on the main
ColorCut Pro screen to
display the ColorCut
Settings
Dialogue box.
Enter the value for your
Knife Offset in the box
1
shown.
Click [ OK ] to save the
settings.
1
* While technically the blade can cut 1.0mm thick material, the force required can vary significantly
based on material density therefore on typical card based stocks we only recommend up to 350
micron board for optimal results.
Name Image
An-
gle
Blade
Diameter
Knife
Offset
Features and Application
Blade
30
O
1mm 0.25mm
For film, very soft material, thin
label materia l.
45
O
1mm 0.25mm
Typically for most other label
material, stickers, and very thin
paper/card,
60 O 1mm 0.25mm
For thick specialty media.
(Magnetic or sandblast media)
Sharply angled tip provides a
longer cutting edge for cutting
media from 0.3 to 1mm thick.*
Circlip
Knife
45
O
1.4mm
0.65 -
0.75mm
Die-Cutting on most packing
board up to 500 micron. Circlip
provides better pressure and
improves blade direction
changes on dense media, from
0.25 to 0.5 mm thick.