TwinLock B600 CashProtect
Operation
Manual V.1.04A
68
4.16.6
Licensing
This paragraph is about licencing further software like MultiPad Go!, for
example. Software licenses are available upon request from your software
supplier.
1.
Open the system (open lock 1 or all locks, depending on the system).
2.
If nothing is on display, press key
Clear
two times.
3.
With the key > select
Service
and confirm with
Enter
.
Service | Reset
is on display.
4.
With the key < or > select
Licensing
and confirm with
Enter
.
Code entry | System manager
and
Code:
are on display.
5.
Enter the system manager code.
Licensing
and
Code:
are on display, as it may be.
Licensing: 00
(Function number = 00): Licencing switched off.
With this setting, the user interface of software can be displayed but no
parameters can be saved. There is no transfer of data to the lock.
6.
Enter a 10 digit sequence of ciphers without blanks consisting of the 2 digit
function number (02) and the 8 digit licensing code.
Function no: 01 + License code -> to activate
menu “user groups”
.
Function no: 07 + License code -> to activate TwinLock B650 CashProtect.
Function no: 08 + License code -> to activate TwinLock B670 CashProtect.
Licensing: FF is displayed in case of an error.
Entering
„0000000000“
deletes the licence.
Saved
is on display.
You have activated / deactivated licencing.
4.16.7
Performing a Restart
Via menu
Restart
, the system manager can restart the system with the
current settings.
1.
Open the lock.
See section „Opening and Closing“ in this chapter.
2.
With the date displayed, with key
<
or key
>
and key
Enter
select
Service
.
Service | 1x bolt work
is on display.
3.
With key
<
or key
>
and key
Enter
select
Restart
.
Restart | Lock 1:
is on display.
4.
With
<
or
>
and
Enter
select the lock.
Code entry | Master |Code:
is on display.
5.
Enter the master code
<
or
>
and
Enter
select
Restart
.
The system restarts with the current parameters not changed.
You have restarted the system successfully.
