TwinLock B600 CashProtect
Operation
Manual V.1.04A
48
4.13.5
Setting the Date and the Time of Day
All the time-based functions and the correctness of the protocol
depend on the proper setting of date and time. Clock change (daylight
saving time) in spring and autumn is automatic with this option
selected. This submenu is also available from the hidden menu.
1.
Unlock the system by opening lock 1 or by opening all locks.
2.
With key > and with key
Enter
select
Settings
.
Settings | Manager
is on display.
3.
Confirm
Manager
with
Enter
.
System manager | Code entry
and
Code:
are on display.
4.
Enter the system code.
Manager | Change code
are on display.
5.
With < or > select
Date/Time
and press Enter.
Time and date are on display after the input. The cursor flashes at the first digit.
6.
Enter the first digit of the current time and confirm with
Enter
.
Continue entering digits until the cursor flashes at the weekday currently set.
7.
With < or > select the current weekday and
Enter
.
The cursor flashes at the first digit of the date.
8.
Enter the day, the month and the year.
Date / Time | Saved
and
Manager | Change code
are on display.
You have set the date and the time successfully.
4.13.6
Dual Code
Optional selection of dual code / two men rule for functions
Open
,
Configuration
and for
Release time
. With the option selected, 2
users are required for opening, for changing
parameters or, with „Time
delay
“ or „
Release time
“
selected, for entering code during release time.
1.
Unlock the system (open lock 1 or all locks).
2.
With
>
select
Settings
and confirm with
Enter
.
Settings | Master codes
is on display.
3.
With
>
and
Enter
select
Lock system
, if required, and
Dual code
.
Code entry
,
System manager
, and
Code:
are on display.
4.
Enter the system manager code.
Open
is on display.
5.
With
Enter
select
Open
or with
>
and
Enter
select
Configuration
or
Release time
.
*=YES | *=NO
is on display.
6.
Select the option with
>
and
Enter
.
The program adjusts the settings accordingly.
You have successfully set
„Dual code“
for the function you selected.
