EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
88
7.14.6
PIN Code User Display
The lock master and the CIT master, as the case may be, can display for
which users PIN code is registered. With the CIT function selected, lock
master as well as CIT master can display the PIN code users of their user
group only.
Even with personnel numbers used, user numbers are on display with the
menu
s „User display“ and „Deleting“ [PIN codes] of the operating unit.
1.
Select menu
Settings | PIN code
.
For an exact instruction for this step, see paragraph above,
‘Changing PIN Code’, steps 1-3.
PIN code | Register
is on display.
2.
With key
<
or
>
select
User display
and press
Enter
.
Code entry
and
Lock 1
, as the case may be, are on display.
3.
With key
<
or
>
select the lock, if necessary, and press
Enter
.
With the CIT function set,
Code entry
and
User: Master
are on display.
With
<
or
>
you can select
CIT master
and press
Enter
.
Without the CIT function set,
Code entry
,
Master
,
0123456789
, as the case
may be, and
Code:
are on display.
4.
Enter the master - / CIT master code.
Please wait
and afterwards
PIN users: No.| User code No.:(N)OK
are on display.
The total number of registered PIN code users is on display in the first line. In the
second line a user number and next to it,
OK
/
NOK
is displayed.
5.
With
<
and > browse through PIN code settings for user numbers.
The letters OK and NOK inform about the state:
NOK
= no PIN code registered for user number displayed.
OK
= there is PIN code registered for user number displayed.
You have successfully displayed how many and which users have PIN code registered
for them.
