EloStar Master 3X0 / 4X0 / - smart
Assembly
Manual V.1.03H
33
5.2.2
Connecting Extensions to QPad
Attached to the inner side of the rear, there is the PCB of the operating unit.
Fig. 21: Terminals of QPad
1)
JST Socket (not used)
2)
Lift off contacts
3)
Socket for connection of option boxes
4)
Socket for connection of other extension units (IO functions)
5)
Emergency supply
6)
Micro USB socket under cap at front bottom
7)
Loudspeaker
8)
Socket for connecting bus cable A
9)
Socket for connecting optional battery compartment
10) Socket for connecting bus cable B (not in use with EloStar, optional)
11) 3 contacts at that jumper caps can be inserted, left to right:
Con4 (insert jumper in case there is no battery compartment / straight
version),
Con12 (insert jumper in case there is no option box)
Con5 (insert jumper in case there is no option box)
12) Plug connection for earth cable (not with EloStar, glass version only)
•
In order to connect IO functions of the operating unit, connect socket 3 of the
PCB with an optional extension unit.
You have successfully connected extensions to the operating unit.
.
