EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
75
7.13.6
Exporting the Protocol (FlatControl)
Settings
Boxes
Release
,
Service
,
PIN code
and / or
Card
of
the user matrix have been marked for you.
Take
the optional PC software TwinComm USB and
optional TwinCard configuration II.
1.
Unlock the system by opening lock 1 or by opening all locks.
2.
With key
<
or key
>
select
Import / Export
and press key
Enter
.
Import / Export | Configuration
is on display.
3.
With key
<
or
>
select
Protocol
and press
Enter
.
Code entry | User: Manager
is on display.
4.
Confirm with
Enter
or with key
<
or key
>
and with
Enter
select
Master
or
present your user identification data.
System manager
,
Master
or
User no.
and
PIN code
are on display.
Entering one kind of code is sufficient.
5.
Press
Enter
and enter PIN code or with
<
or
>
select
Code card
.
See the instructions for opening locks at the beginning of the chapter.
Please wait
and afterwards
Export log | Insert card
are on display.
6.
Insert TwinCard configuration II into the operation unit.
See ‘Inserting a Chip Card into the Operating Unit’.
Export log | >>>
is on display. Data are transferred to the card. The number
of brackets indicates the progress.
Export log | Remove card
is on display.
7.
Remove the card from the operating unit.
OK
and afterwards
Import / Export
are on display.
You have successfully transferred the protocol onto a chip card.
TwinCard
configurat ion
