EloStar Master 3X0 / 4X0 / - smart
Start-Up
Manual V.1.03H
46
If you want to register a second lock, confirm with
Enter
.
In this case, repeat step 9.
If you do not want to register another lock, select
Clear
.
Perform the next step only after all locks have been registered.
10. Confirm with
Enter
or select
Clear
(see above).
Date / Time
and
Code-entry | System manager
and
Code:
are on display.
11. Select the digits of the system manager code.
Also see chapter
„Operation“, section „Entering PIN code“. System time and date
are on display.
12. Press key Enter in order to set the time.
The cursor flashes over the first digit of the displayed time.
13. Enter the current time with < and > and Enter or with the numeric keys.
The cursor flashes to the left of the weekday.
14. With < and > select the first two letters of the current weekday and confirm with
Enter
.
The current weekday is on display.
The cursor flashes at the first digit of the date.
15. Enter day, time and year in the same way as you entered the time.
Date / Time | Saved
is on display.
You have successfully set date and time.
Lock system | Registered
is on display.
16. Test opening and closing, adjust bolt projection, if necessary.
Check whether the bolt work contact, if used, functions properly and finish start-
up (see next section).
You have initialised the system successfully.
