INIM smartliving series, Руководство пользователя

Страница: 44 / 64

44 Using the system
Centrali anti-intrusione
Via AlienMobile
On accessing the “Climate” section you will find a list of all the keypads configured with
the thermostat function. If there is only one keypad, you will immediately access the
thermostat configuration page.
Each listed keypad will show:
• keypad description
• thermostat operating mode
• keypad temperature reading
• View button for access to the thermostat configuration described in the Alien
keypad section
5-14
Teleservice via Nexus
Requests for teleservice can be made over the GSM network by means of the “Nexus
Teleserv.” option.
This option allows the installer to carry out remote programming operations over the
GPRS network.
Note
This is a service provided by the installer company with the user's collaboration.
Via Keypad
Access the “Nexus Teleserv.” section of the user menu by typing-in a valid code PIN.
Via Alien touch screen
Access the “Menu” section by tapping , type-in the user code and then access the
“Actions” section.
This section contains a list of control panel commands which can be activated by
tapping ON, amongst which Nexus teleserv.” option.
5-15
Codes
The user menu provides a section for the programming of the parameters of
hierarchically lower user codes (refer to paragraph 2-5 User Codes).
The parameters which can be changed in this section are also available in other sub-
sections.
Via Keypad
Access the “Codes” section of the user menu by typing-in a valid code PIN.
1. Use keys and followed by to select the user code you wish to
change.
2. Use keys and followed by to select the parameter you wish to
change.
3. Change the parameter then press to save the changes.
• Description: edit field for the code description.
• Partitions - select the partitions the user code is assigned to. Press
, to enable
the partition and to disable it.
• Options - use and to enable/disable the code options.
•• Partition filter - if this option is enabled, the code will be able to change the
parameters only of codes with a lower rank in the system hierarchy whose
partitions are amongst the partitions assigned to the code being programmed.
For example, if a code is configured as “Master” with “Partition filter” and is
assigned to partitions 1, 3, 5 and 7, it will be able to enable/disable or change the
PIN of a “User” code assigned to partitions 1 and 5 but not the PIN of a “User”
code assigned to partitions 1, 2, and 3.
•• Text menu and User menu - the combination of these two options allows
immediate visualization of the menu screens on the keypad displays after
acceptance of a valid user PIN. Refer to the following table.
User Code
Overtime request
Thermostat
Nexus Teleserv.
User Code
Thermostat
Nexus Teleserv.
Codes