INIM smartliving series, Руководство пользователя

Страница: 42 / 64

42 Using the system
Centrali anti-intrusione
5-11
Teleservice request
This command sends a call to the installer company.
Your installer must enable control panel option “Num15ForTeleserv”, otherwise this
function will not be available.
Via Keypad
Method 1
Activate theshortcut assigned to the “Teleservice req.” (shortcut n.8: ).
Method 2
Access the “Teleservice request” section of the user menu by typing-in a valid code PIN.
Via Alien touch screen
Access the “Menu” section by tapping , type-in the user code and then access the
“Actions” section.
This section contains a list of control panel commands which can be activated by
tapping ACTIVATE, among them is the “Teleservice”.
Via Reader
Hold a valid digital key in the vicinity of the reader until the reader LEDs or display
indicates "Teleservice Request" (shortcut n.8).
5-12
Overtime request
This operation can be carried out under the following conditions only.
• The partition concerned must be timer-controlled.
• The auto-arm option must be enabled (refer paragraph 5-4 Activations).
Each overtime request postpones the auto-arming operation by 30 minutes.
Via Keypad
Method 1
Activate the shortcut assigned to the “Overtime” (shortcut n.7: ).
Method 2
Access the “Overtime req.” section of the user menu by typing in a valid code PIN.
Via Alien touch screen
Access the “Menu” section by tapping , type-in the user code and then access the
“Actions” section.
This section contains a list of control panel commands which can be activated by
tapping ON, amongst which “Overtime req.”.*
Via Reader
Hold a valid digital key in the vicinity of the reader until the reader LEDs or display
indicates "Overtime" (shortcut n.7).
Over-the-phone
Type-in the PIN of a user code followed by “#”, then press the key (from “0” to “9”)
which the installer has programmed to activate “Overtime” (shortcut n.7).
Via Wireless remote-control device
Push the respective button on the remote-control device and verify the outcome of the
requested operation, as described in paragraph 2-6-1 Air2-KF100 Wireless keyfobs.
18:23 01/02/2016
DDDDDDD
User Code
Change PIN
TelephoneNumbers
Teleservice req.
Type in code
******
Method 2
Method 2
Service call
activated
Method 1
18:23 01/02/2016
DDDDDDD
User Code
TelephoneNumbers
Teleservice req.
Overtime request
Type in code
******
Method 2
Method 2
Auto-arming
postponed
Method 1