INIM smartliving series Скачать руководство пользователя страница 33

Страница: 33 / 64

User’s manual

Using the system

Via Keypad

Method 1

Activate the shortcuts associated with keys

, ...,

(shown on the display) with

or without code entry:

• The shortcut assigned to the “Voice functions menu” (shortcut n.14:

) allows

you to view the “Voice functions” section. Select the required function by means of
keys

and

then press

•• Record/Playback - the operation time-out (expressed in seconds) will be

signaled by a counter and a progress bar on the display. If you wish to interrupt
the record/playback operation manually, press

, otherwise, it will end

automatically when the pre-set time-out expires. You can adjust the volume

during the playback phase using keys

and

•• Delete - this operation must be confirmed by pressing

•• IntercomCall - the display provides the list of keypads you can call. Use

and

to select the keypad you wish to contact, then press

to start the

call. The recipient keypad will emit an audible signal to indicate the incoming call
and the display will appear as shown in the figure. The recipient can press

answer the call or

to reject it. Both the caller and the call recipient can end

the call by pressing

. The volume can be adjusted during the listen phase by

pressing keys

and

• The “IntercomCall" shortcut (shortcut n.11:

) allows you to view the previously

described “Intercom call" section.

Method 2

Access the "Voice functions" section of the user menu by entering a valid PIN code.
Follow the instructions described in Method 1.

Via Alien touch screen

When accessing voice functions via the Alien touch screen, first access the “Apps”

section by tapping the

button then access the “Voice functions” section. Following

is a list of the sections relating to each function which can be activated by tapping the

respective ON button:
• Record
• Play
• Delete
• Intercom
The sections accessed through the touch screen reproduce the same voice functions as

those previously described for keypads with keys.

5-4

Activations

The activation/deactivation of the SmartLiving system peripherals and elements

(described in the following section) enables them to operate in accordance with their

settings (activation) or disables their functions completely (deactivation). The user has

full control over activation/deactivation of the SmartLiving system peripherals and

elements.
The following section describes the consequences of activation/deactivation.
• Zone - disabled zones cannot generate alarms (bypassed).
• Auto-arm operations - can be activated/deactivated separately on each single

partition. If this option is enabled on a partition, it will arm and disarm in accordance

with the On/Off settings of the respective timer.

• Codes - deactivated (disabled) codes cannot access the system.

Activation/Deactivation can be achieved only on hierarchically inferior codes (refer to

paragraph 2-5 User Codes).

• Keys - deactivated (disabled) keys cannot access the system.
• Keypads - deactivated (disabled) keypads do not permit code entry (or access to

the menu), therefore, they cannot manage shortcuts. However, the LEDs and display

will be refreshed.

• Readers - deactivated (disabled) readers cannot provide access to the system,

therefore, cannot accept keys or generate commands. However, the LEDs will

indicate the current status of the system.

• Timers - activated timers (On) manage their associated elements (partitions, codes,

keys) in accordance with their settings. Deactivated timers cannot time-manage their

associated elements, therefore, they will function in accordance with Timer Off status.

18:23 01/02/2016
DDDDDDD

User Code
Manage alarms
Arm/Disarm ops.

Voice functions

Record