INIM smartliving series, Руководство пользователя

Страница: 23 / 64

User’s manual
The SmartLiving System 23
2-9
WEB / e-mail functions
The SmartLAN/G board guarantees complete access to the functions of the SmartLiving
system either by means of the user and installer codes. The control panels can be
reached and configured even when the computer in use is not equipped with INIM
software. An Internet connection is necessary either through a PC or the AlienMobile
app for smartphones and tablets.
All SmartLAN/G equipped SmartLiving control panels are capable of sending event
associated e-mails (SmartLAN/G is an optional accessory board).
The e-mail text, subject, attachments and recipients must be edited by your installer.
No changes whatsoever should be made to the e-mail structure. Each e-mail can be
associated with a subject, a text body (in a format capable of containing a direct link to
a website or to an IP addressable device such as an IP camera) and an attachment
document/file.
For a description of a typical e-mail format, refer to paragraph 5-21-1 e-mail.
In addition to e-mails, the SmartLAN/G board allows you to interface with the control
panel from any computer or mobile phone device (PDA, mobile phone, etc.) via any
Internet browser. The SmartLAN/G board integrates a web-server which allows users to
operate the control panel from remote locations without the need of authentication.
For web-server access and use, refer to paragraph 5-21-2 Access to and use of the Web
interface.
2-10
AlienMobile Application
INIM Electronics now offers SmartLiving control panel users the Alien Mobile application
for smartphones and Android or Apple tablets, in two different versions:
• AlienMobile - free App with basic functions
• Alie - purchasable App with advanced functions
The application can be downloaded from an on-line application store (Play store or
Apple app store).
The user, via smartphone or tablet can monitor up to 5 SmartLiving control panels by
means of an interface similar to the one described in this manual for the Alien keypad or
for the web-server interface of the SmartLAN/G board.
It is the installer's task to prepare the control panel for direct connection to the devices
which use the Alien Mobile application and to configure the application for use with the
system to be monitored and, finally, to provide end-users with all the necessary access
data.
For instructions for use and access to the system via Alien Mobile refer to paragraph 5-
22 Using AlienMobile application.
2-11
Arming scenarios
A scenario is a preset arming configuration which applies various operating modes to
the SmartLiving system partitions (the scenarios are programmed by the installer in
accordance with user requirements).
For example, if all the occupants are leaving the building, you can apply a scenario that
arms all the partitions and activates the outputs which closes the rollerblinds and
switches off the lights. On returning to the building, you can apply a scenario that
disarms some of the partitions (those required) and activates an output which switches
on the garden lights.
Following the activation of a scenario, it is also possible to change the status of several
outputs simultaneously or change the value of the voltage supplied to the outputs and
thus change, for example, the brightness of any lights with this capability.
The installer will set up the and make available the scenarios which best suit user
requirements. Users can activate the scenarios via keypads, readers, remote-control
devices and over-the-phone by means of shortcut commands (refer to Chapter 3 -
Shortcuts). Scenarios can also be activated via a browser with an web interface for
mobile phones or PCs, or through the Alien Mobile application by accessing the
“Scenarios” section (paragraph 5-2 Arming and disarming partitions).