INIM smartliving series, Руководство пользователя

Страница: 24 / 64

24 The SmartLiving System
Centrali anti-intrusione
“SHOW SCENARIO”
If the “Show scenario” control panel parameter is active, the left side of the second line
on the screen will display the current scenario.
“VIEW PARTITION
STATUS”
If you are using an Alien keypad, the "View partition status" option (refer to paragraph
3-3-3 Remote-control shortcuts) will allow you to select the visualization mode of the
operating status on the bottom bar of the display:
• Single partition - the characters relating to the operating status of the partitions will
be shown, as described in Table 2-2: Display visualization
• Single scenario - the description of the active scenario will be shown
Additionally, tapping the bottom bar on the home page will open (for 3 seconds) a
window containing a list of the active scenarios. If required by programming (paragraph
5-8 Keypad settings), it may request entry of a valid code.
2-12
Videosurveillance
The SmartLAN/G board supports JPEG and MJPEG streaming for surveillance cameras,
viewable as a full video or snapshot.
The SmartLiving control panel is capable of managing two types of IP cameras (or
“webcams”), which use one URL address for video viewing:
• static cameras
• cameras with Onvif protocol, which allow user interaction thanks to remote control
capabilities and pre-programmed audio/video profiles
The visualization of the shots (images or video) is achieved by accessing the URL
address of the camera. It can be done via web browser or AlienMobile application,
through the “Camera” section, or by means of the cameras configured inside the
graphic maps.
The user can view the image flow or video in real-time and, solely through the Alien
web-interface, view the image recordings which precede and follow the occurrence of
an event.