manualshive.com logo in svg

INIM smartliving series, Руководство пользователя

Поделиться
Скачать
INIM smartliving series Скачать руководство пользователя страница 28

28

Voice functions

Centrali anti-intrusione

Chapter 4

VOICE FUNCTIONS

If the SmartLiving control panel is equipped with a SmartLogos30M voice board, you

will be able to take advantage of all the voice functions provided by the JOY/MAX and

Alien keypads, including the over-the-phone voice guide.
Your installer will program the voice messages you require:
• for event-associated calls
• for event-associated announcements on the keypad at address 1
All keypads with voice functions provides a voice memo-box for the recording and

playback of messages. This handy function will allow you to leave messages for other

users who have access to the keypad; refer to paragraph 5-3 Voice box and intercom

functions. You can record, play and delete messages at your own discretion.
The presence of a new memo in the memo-box will be indicated on the blue LED on the

keypad, as described in Table 2-6: Keypad LEDs.
The SmartLogos30M voice board provides a total of 60 seconds memo time (shared by

all the voice-capable keypads in the system).

Note

15 memo slots are available.

Содержание smartliving series

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды