INIM smartliving series, Руководство пользователя

Страница: 17 / 64

User’s manual
The SmartLiving System 17
Further objects displayed on the Alien screen depend on the section/page being
accessed by means of the buttons. The layout of such pages depends on the functions
and buttons available and how they are used (paragraph 5-20 Alien function keys).
There are also alerts which the control panel activates automatically and that appear as
pop-ups during the following events:
• Zone alarm or tamper
If any of the keypad partitions has alarm or tamper event memory, a pop-up will
appear showing:
•• an “ALARM” warning and the description of the zone which generated the alarm
or tamper signal
•• the Disarm button, to disarm all the armed partitions that the code and keypad
in use have in common
•• the Stop alarms button, to deactivate the outputs activated by the alarm signal
•• the Clear call queue button, to cancel the calls in the outgoing call queue
•• the Home button, to provide direct access to the home page
• Activation of the entry time
• Activation of the exit time
If an entry or exit time is activated, a pop-up will appear showing:
•• a string indicating the remaining seconds of the running entry/exit time
•• the Disarm button, to disarm all the armed partitions that the code and keypad
in use have in common
•• the Scenarios button, to access the scenarios available for activation
•• the Home button provides direct access to the home page
• icon which appears when you tap the display and the keypad is blocked due
to 5 consecutive entries of an invalid code.
• icon which is shown when you tap the display and the keypad is blocked due
to 5 consecutive entries of an invalid code.
CLEANING THE DISPLAY
Touching the "Settings" option on the home page for at least 7 seconds disables the
sensitivity of the display for 20 seconds. During this interval, the "CLEAN SCREEN"
message is shown to indicate that it is possible to clean the screen.
REBOOTING
Touching any part of the screen for 50 seconds will restore touch screen sensitivity.
2-3-8
Signalling on the
Buzzer
Keypads equipped with buzzers provide you with audible signals, that is, if the sound
has not been switched off.
If the keypad has voice function capacity, the buzzer will also signal incoming intercom
calls from another keypad.
The buzzer signals the running entry, exit and pre-arm times (refer to Appendix A,
Technical terminology and Glossary) of enabled partitions. The activation these signals
can be set up by means of the keypad options described in paragraph 5-8 Keypad
settings.
If the control panel is duly programmed, the keypads will be able to generate alarm
signals on the buzzer.
G Tapping this section on the display opens (for 3 seconds) a window containing a list of the active scenarios. If required by programming (paragraph
5-8 Keypad settings), it may request entry of a valid code.
H System information icons, as described in Table 2-3: Information icons.
I
If you are inside a section, this field will show the following buttons which may cover the information buttons:
• Back level This key allows you to step back to the previously active function.
• Home Button, present only on the Alien/S model, which allows you to go directly to the home page.
Table 2-7: Alien - screen