INIM smartliving series, Руководство пользователя

Страница: 12 / 64

12 The SmartLiving System
Centrali anti-intrusione
• Standby - shown when the control panel is functioning normally and there are no
alarm, tamper of fault events present on the system.
• Zone alarm or tamper - shown when the control panel detects or signals violation on
a zone, both in the event of intrusion or detection of a lost device
• Maintenance - shown when the control panel is in maintenance mode for repair or
programming purposes
Note
The blinking status of characters relating to the partition statuses which appears on the screens
of Aria keypads is not in fact a blink but is the solid negative image of the character.
Table 2-2: Display visualization
Dis-
play
line
Control panel status
Standby Alarm or tamper Maintenance
1
The first line of the display shows the date and time.
If at least one of the keypad partitions
has saved an alarm or tamper event to
the memory, the first line of the screen
will flash the descriptions of the zones
concerned every 3 seconds.
Note
Open zones are signaled by blinking on
the red LED
.
If the control panel is in Service
mode, a string will be shown indicat-
ing the address of the keypad in use
(in the figure, the keypad is at
address 3).
If you are using a JOY/MAX keypad, the date and room
temperature will alternate on the screen every 3 seconds.
If you are using a Joy/MAX keypad,
the string will also show the address
of its built-in proximity reader (in the
figure, the reader is at address 5).
If the “View open zones” control-panel option is enabled,
the descriptions of zones that are not in standby status
when the keypad partitions disarm will be shown in
sequential order approximately every 3 seconds.
Any auto-bypassable zones will be shown in white on black
background.
If the control panel is in Service mode and at least one of the keypad partitions
has saved an alarm or tamper event to the memory, the above-described
strings will alternate on the display.
2
left
The left side of the second line shows the characters that
indicate the current status of the partitions the keypad is
assigned to:
•
D
= partition disarmed
•
A
= partition armed in Away mode (interior
and perimeter zones armed)
•
S
= partition armed in Stay mode (perimeter
zones armed)
•
I
= partition armed in Instant mode
(perimeter zones armed with no delay)
•
-
= partition does not belong to the keypad
In the case of the SmartLiving 505 or 515, 5 characters
indicating the status of partitions 1 to 5 will be shown.
In the case of the SmartLiving 1050 or 1050L, 10 charac-
ters indicating the status of partitions 1 to 10 will be
shown.
The display of the SmartLiving 10100L model, alternates
at 3 second intervals, between 10 characters, indicating
the status of partitions 1 to 10, and 5 characters indicating
the status of partitions 11 to 15.
In the event of a partition alarm or
tamper memory, the red LED on
the keypad and the characters corre-
sponding to the partitions concerned
will blink.
The line is the same as when the con-
trol panel is in standby condition.
If the “Show scenario” control panel parameter is active, the left side of the second line on the screen will display the current scenario.
2
right
The right side of the second line allows you to view several icons which provide visual information regarding the system.
For a detailed description of these icons refer to Table 2-3: Information icons.
3
4
Lines three and four on the display are occupied by the icons which correspond to the shortcuts assigned to the function keys , ...,
.
If no shortcuts are programmed on the keypad function keys, the respective spaces on the display will remain empty.
18:23 01/02/2016
Panel T03
K03 Service
18:23 PM 25.4
C
Mainten K03 P05
Panel T03
Panel T03
Panel T03
Mainten K03 P05
DASIDASI--
DASIDASI--
D SIDASI--
SCENARIO 001
DASIDASI--