INIM smartliving series, Руководство пользователя

Страница: 26 / 64

26 Shortcuts
Centrali anti-intrusione
3-2
Shortcut with code
Besides the shortcuts provided by keys , each user code can
have as many as 22 customized (personal) shortcuts.
Users will be able to access their code-shortcuts only after validating their PINs (refer to
paragraph 2-5-1 Ways of accessing the user menu). Each code can be programmed to
manage:
• Up to 12 shortcuts can be activated by keys
, ..., and identified by explicit
icons.
• Up to 10 shortcuts can be activated by keys , ..., . If a code is enabled to
operate the system over-the-phone, these shortcuts will also be available on the
telephone number-keys.
Entry of a code associated with shortcut no.9: at a Joy/MAX keypad, prompts the
voice announcement of all the shortcuts assigned to the number keys.
Via Keypad
1. Validating your PIN
2. Access the user menu, using the method described in paragraph 2-5-1 Ways of
accessing the user menu at point 2.
3. Press the key , ..., which corresponds to the shortcut icon or press the
key , ..., which is assigned to the shortcut.
“FIXED LENGTH”
If the installer has enabled the “Fixed length” option on a user code, the shortcut
assigned to F12 will activate as soon as the user types-in their PIN without need of
touching any other key.
Over-the-phone
1. Establish communication with the control panel.
2. Type in your code followed by “#”.
3. Listen to the voice prompts regarding the available shortcuts.
4. Press the number key which corresponds to the required shortcut.
3-3
Key and Reader shortcuts
3-3-1
nBy/S and nBy/X
Reader shortcuts
Hold a valid key in the vicinity of the reader, as soon as the reader accepts the key, a
series of visual signals on the reader LEDs will indicate the various shortcuts.
When the required shortcut is indicated, remove the key to activate the corresponding
shortcut action.
The visual signals on the Reader LEDs are as follows (refer to Table 2-10: Reader LEDs
with key at reader).
1. Red LED on for 3 seconds - shortcut associated with the red LED of the reader
or first shortcut of the key
2. Blue LED on for 3 seconds - shortcut associated with the blue LED of the
reader or second shortcut of the key
3. Green LED on for 3 seconds - shortcut associated with the green LED of the
reader or third shortcut of the key
4. Yellow LED on for 3 seconds - shortcut associated with the yellow LED of the
reader or fourth shortcut of the key
5. All LEDs on for 3 seconds - first shortcut associated with the user key
6. All LEDs off for 3 seconds - disarm all the partitions.
7. If the key is not removed, the reader will run through the entire sequence again
starting from the red LED. Selection of the desired shortcut (indicated by a spe-
cific LED) will not occur until the key is removed.
If, during this phase, any of the partitions are armed, the LED sequence will start at
point 6.