InfiniSource ETC 100, Руководство по оборудованию

Страница: 163 / 234

TimeForce II Hardware Guide 151
Velocity Clocks
Manage Memory
This menu option gives you access to the memory of the time clock.
From here, the following actions can be taken:
1. CLEAR PUNCH MEMORY
2. SET TO DEFAULTS
3. SCAN DATA MEM
4. CLEAR EMPLOYEE INFO
5. SEARCH FOR DATA
6. DUMP PUNCH MEM
7. TEST I2C MEMORY
Clear Punch Memory
When this option is selected, the clock will erase all punch data.
Note: This procedure is irreversible . Any data that is cleared from the
clock can never be recovered.
Set to Defaults
This option restores the clock to its default Clock ID and Password.
Note: The ClockLink software uses the Clock ID and Password to com-
municate with your clock. The information specified in the Time Clock
Profile must match the information set in the time clock itself.
Scan Data Memory
This option scans the memory set aside to hold employee punches. The
number of punch packets currently saved in the clock is displayed along
with the memory address of where punches start and end. It also looks
for punch data being stored by the time clock looking for data that is
outside of its known pointers. If data is found, the pointers are reset to
include the found data, making the information available for download.
This option is intended for use by Infinisource Technical Support.
Clear Employee Information
This option clears all information that has been uploaded to the clock
from the TimeForce system (such as employees, departments, default
schedules, etc.). This option is
not reversible. Once deleted, data must
be re-uploaded to the clock using the ClockLink program.