InfiniSource ETC 100, Руководство по оборудованию

Страница: 13 / 234

TimeForce II Hardware Guide 1
Introduction
Introduction
There are three lines of time clocks available for use with TimeForce II.
Each line consists of multiple clock models, allowing you a range of
functionality and communication options. The lines of clocks that
Infinisource offers are ETC clocks, IntelliClocks (or IQ clocks), and
Velocity clocks (or V800/V850 clocks).
ETC 100 Clock
The 100 Series time clock is used for collecting only the most basic
Time & Attendance information, and uses a standard magnetic stripe
card reader.
IntelliClocks
There are four models of IntelliClocks which offer basic Time & Atten-
dance tracking, as well as Departmental and Job Tracking support. Intel-
liClock models are IQ 300, IQ 400, IQ 500, and IQ 1000.
Data may be entered into an IQ Series clock by using a magnetic card
reader and time cards, by using a bar code wand or reader, by using
proximity time cards, or by entering data directly into the clock’s key-
pad, if this option is enabled.
The IntelliClocks have In, Out, Lunch and Break buttons so that the
employee can designate very specific punches.
These clocks also offer multi-level password protection, so that the time
clock menu options can only be accessed by users with an “Admin” or
“Supervisor” password.
Both clock lines are available with a variety of options, each of which
will be explained in a later section.
The IQ 1000 model clock also comes equipped with a biometric reader,
allowing your employees to clock in and out using their finger tem-
plates.
Note: The biometric reader is optional on a model IQ 1000 clock.