InfiniSource ETC 100, Руководство по оборудованию

Страница: 142 / 234

130 Infinisource
4. The program allows you to search for existing clock profiles based
on the clock group that they are assigned to. Make the desired
selection from the
Group drop-down menu. Select “All” to bring
up all time clock profiles.
5. Click on the [DISPLAY] icon. The found clock profiles are dis-
played.
6. In the Number column, click on the ID of the time clock that you
would like to specify allowed periods for. The “Clock” screen
appears. The
Allowed Periods setup is located directly below the
clock info section of the screen.
7. For each day of the week, enter the start time and end time of the
range during which employees are allowed to punch at the clock.
To leave a day unrestricted, set the start time to “00:00” and the end
time to “23:59.”
8. Click on the [UPDATE] icon located at the bottom of the screen to
save the changes that you have made to the time clock profile.
Relay Events
Infinisource time clocks come with an optional feature called “Relay
Events.” This feature allows you to connect an external bell, buzzer or
other signal device to the time clock and program specific times of the
day for the signal to go off, usually indicating schedule start, stop or
break times. Each time clock can handle up to 32 relay events.
Relay Events are assigned to time clock profiles in TimeForce II. Use
the following instructions to assign relay events to your time clock pro-
files.
Note: The option to edit Relay Events will only appear if the “Upload
Relay Events” option is selected in the time clock profile.
1. Open the TimeForce II software and log in as an administrator-level
user.
2. Click on the main “Clocks” navigation tab at the top of the screen.
3. From the Existing Clocks section of the screen, click on the [EDIT/
VIEW] icon.