InfiniSource ETC 100, Руководство по оборудованию

Страница: 103 / 234

TimeForce II Hardware Guide 91
Using the Model IQ 1000 IntelliClock
49
Door External
Only
The TimeForce system allows you to specify that finger
template verification is not required for certain employees.
With this clock option enabled, those employes will be
granted door access with no finger template verification,
while still enforcing verification for others.
50
In/Out Keys
Required
When enabled, the clock requires the use of the <IN> and
<OUT> keys on the clock keypad before a punch is
accepted.
51 Cell Provider
For IQ 1000 Cellular clocks only, this option is used to
choose the “Cellular Network Access Provider” (AT&T, T-
Mobile) that is used to gain cell network access for the
clock.
52
Custom
Wiegand
This option is used with Wiegand card readers, and
allows the user to specify how the collected bit patterns
(data) read from time cards will be interpreted by the
clock.
53 GPRS Static IP
For use with GPRS Cell clocks only, this option is used to
enable or disable the Static IP feature built into GPRS
SIMM cards that are equipped with “special” network pro-
gramming. The Static IP SIMM card feature allows users
to upload information (such as profiles and finger tem-
plates) to the clock using the ClockLink utility.
54 DHCP
When enabled, Ethernet equipped clocks will query the
World Wide Network for an IP address that the clock will
use for communicating on the network.
Note: Each time the clock is power-cycled it will request
and may receive a different IP address. With this option
disabled, Ethernet equipped clocks must be given a static
IP address from within the clock’s menu.
56 Cache Preferred
With this option enabled, the clock will first look in its own
memory files for employees clocking in or out. If the
employee cannot be found in the clock memory,
employee information will be requested from the On
Demand server.
TABLE: Hardware-2: IQ 1000 Clock Options
Number Name Description