Industrial Scientific RGX Series, Руководство по эксплуатации продукта

Страница: 16 / 62

6
Compatibilities
Instruments
Use the information supplied below to ensure gas-detection instruments are compatible with the RGX
Gateway. As needed, upgrade instrument firmware to the required version, add LENS Wireless
functionality, and refer to the instrument's product manual.
Table 1.2 RGX Gateway compatible gas-detection equipment
Instrument Required
firmware version
LENS Wireless
required
Industrial Scientific
Product Manual part
number
Ventis® Pro Series V3.0 or higher Yes 17156830
Radius® BZ1 Area Monitor V3.0 or higher Yes 17155915
Operational power sources
WARNING: The RGX offers these power-input options: 12 V Charger Port, IS Power Port, and 9 – 30 VDC
Terminal Block. When connecting external power, select only a single power-input type; connecting multiple
power inputs is not supported .
The RGX can draw operational power from its factory-installed rechargeable lithium-ion battery, which can
be charged in a nonhazardous location using the RGX charging power supply.
The operational run time for the factory-installed battery can be extended with the use of a compatible
power-supply accessory only from Industrial Scientific. Each power-supply accessory, as listed below, has
unique use restrictions or certified uses. Before using either accessory, read and understand its product
manual and control drawing 1810D9509-200, as represented by the schematic diagrams in
Appendix A
of this manual. These schematics are also included in each power supply's Product Manual (part numbers
listed below).
Table 1.3 RGX compatible power-supply accessories
Power supply
Orderable part number Product Manual
part number
Intrinsically Safe Extended Run Time Power Supply
a
(ISERTPS), Intrinsic Safety (IS) Cable, and the RGX IS
Cable Adapter
18109516 (power supply)
17156261 (cable)
18109575 (adapter)
17158248
Extended Run Time Power Supply
a
(ERTPS) Kit
(includes IS Cable) and the RGX IS Cable Adapter
18109388-XA
b
(power-supply kit)
18109575 (adapter)
17158385
a
When used with the RGX Gateway, ensure a distance of 5 m (16 ' 4 ″ ) between the RGX and its power-supply accessory from Industrial
Scientific, or any that are in use nearby.
b
Where X indicates regional power-cord type (1 for NA, 2 for EU, 3 for AU, and 4 for UK).
The RGX Gateway's input power parameters are listed below.