Industrial Scientific RGX Series, Руководство по эксплуатации продукта

Страница: 44 / 62

34
Figure 4.2 If your installation excludes connecting both fixed DC power and Ethernet,
continue below with step 1; otherwise, use the instruction set in Figure 4.3.
─
1 Mount or place RGX
If the unit has been prepared for mounting, use the customer-supplied equipment and services
to complete the mounting task; otherwise place the unit at the desired operational location.
2 Port caps and power cables
─
Choose only one option below (a, b, or c) regarding the operational power input for the RGX
and follow that set of instructions.
WARNING: The RGX offers these power-input options: 12 V Charger Port, IS Power Port, and
9 – 30 VDC Terminal Block. When connecting external power, select only a single power-input
type; connecting multiple power inputs is not supported
.
When installing a port cap or connecting a power supply cable to a port, push the cap or cable
slightly, then turn its swivel connector clockwise (approximately 45°) until it clicks closed or a
full-stop connection feedback is felt.
a No external power source
If the RGX will draw operational power only from its factory-installed battery, cap the charging
power-supply port and the IS power port.
Skip to Operation Precheck
.
b Power supply accessory (ISERTPS or ERTPS)
IMPORTANT
:
The warning above also applies to this option.
If the RGX will draw operational power from a compatible power supply accessory, cap the
RGX charging power-supply port.
Ensure the ISERTPS or ERTPS is installed, connected, and used in accordance with the
instructions provided in its product manual.
Skip to Operation Precheck
.
c Charging power supply (part number 17158665) — use only in a nonhazardous location
IMPORTANT
:
The warning above also applies to this option.
If the unit will be operated in a nonhazardous location and will draw operational power using
the RGX charging power supply, cap the RGX IS power port.
Uncap the unit's charging power supply port to expose the port for use; connect the power-
supply cable to the port. Plug the cord into a compatible electrical outlet.
Skip to Operation Precheck
.
Figure 4.2 Installation that excludes fixed DC power and Ethernet