Industrial Scientific RGX Series, Руководство по эксплуатации продукта

Страница: 8 / 62

vi
IMPORTANT: Equipment warnings and markings must be legible during normal use. Clean with soft cloth and mild
detergent.
This device complies with Part 15 of the FCC Rules for Intentional Radiators. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Changes or modifications not expressly approved
by the manufacturer could void the user’s auth ority to operate the equipment.
This equipment generates and radiates radio frequency energy during normal operation. If not installed in accordance
with the installation instructions, it could cause interference with other types of radio communications. Even when
installed in accordance with these instructions, interference
could occur in a specific installation. If it is determined that
this equipment is causing interference to radio communications (by turning this equipment off and on), the interference
may be corrected by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
To comply with FCC, ISED, and European Council recommendations on the limitation of exposure of the general public
to electromagnetic fields (1999/519/EC), install and operate this device to maintain at least 20 cm (8 inches) separation
distance between the RGX Gateway and anywhere personnel may be present for prolonged periods of time.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Industrial Scientific recommends persons with a pacemaker or implantable cardio defibrillator (ICD) should maintain a
minimum separation distance of 15 cm (6 ") between the pacemaker or ICD and a wireless-enabled device.
Please consult your physician or the manufacturer of your pacemaker or implantable cardio defibrillator (ICD)
manufacturer for additional guidance and recommendations.
It is recommended to not to place this wireless enabled device near any blasting circuits, explosives and detonators.
The RGX Gateway's optional Magnet Mount Kit and individual kit items can cause injury. To avoid injury, Industrial
Scientific recommends the following.
•
Persons with a pacemaker or implantable cardio defibrillator (ICD) should maintain a minimum separation distance
of 90 cm (36 ″) between the pacemaker or ICD and the magnet. Please consult your physician or pacemaker or
ICD manufacturer for additional guidance and recommendations.
•
Neodymium magnets have a strong attractive force. Each can attract quickly when in close proximity to another
magnet or metal surface and cause injury. The magnet material is brittle; it can crack or splinter on impact to
cause injury and potentially become a flying hazard. Use protective gloves and eyewear to avoid a potentially
severe pinch injury, cut, or splinter.
•
Do not use magnet mounts with units that will draw power from a fixed DC power source.
•
Keep magnets away from electronic devices, identification cards, and credit cards that use microchips, magnets,
or magnetic fields.