2 - 45
3) Set the mode of the voltmeter to AC voltage measurement.
4) Start the operation by K2.
5) Next, set the indicated value of the voltmeter to “the calculated value of 1)
±0.5mV” by adjusting the drive voltage of K2. Record the value of the adjusted
drive voltage to a check sheet.
6) Record these items indicated on the display ;
ACC (acceleration) [m/s
2
]
7) Change the connection of [OUTPUT Ch1] to [INPUT Ch2] of the I/O UNIT. Also
change the input setting of K2 to Ch.2 from Ch.1. The input sensitivity of Ch.2 is
the same as Ch.1.
8) Operate the same procedure as 3)
~
6), and record the measured data.
9) These procedures are needed to be operated also for Ch.3 and Ch.4. When the
optional input channels are added, the input channels Ch1. ~ Ch8 of the expansion
board are also needed to be measured and recorded.
10) Change the input type to [Charge input (1mV/pC)] from [Charge input
(10mV/pC)] . Operate the same procedure as [Charge input (1mV/pC)] and record
the measured data.
Criterion
Accelerometer : 100.00m/s
2
within ±2
%
(98.00 ~ 102.00)
Monitoring output : input voltage within ±5
%
(335.825
~
371.175)
<
Check Sheet
>
For conducted maintenance items next page, put a circle in the “Result” column.
If the system has a fault or damage, or if a defective part is replaced, enter the description
in the “Remarks” column.
After checking all maintenance items, send this check sheet to us by E-mail.
Содержание K2-CE
