Immergas VICTRIX ZEUS SUPERIOR 25, Инструкции и рекомендации, Страница: 98 / 128

98
INS
TALLER
U
SER
M
AINTEN
AN
CE
TECHNI
CI
AN
TECHNI
CAL
D
AT
A
MENU/Service/Boiler/Flue
Menu item Description Range Default
Customised
value
Length Sets flue length
min / med /
max
Min
Enable klapet valve Not used on this model
Complete /
Partial Com-
plete
A change in these parameters will cause the boiler block signalled with E72; to reset E72, a quick calibration must be activated.
MENU/Service/Boiler/Timers
Menu item Description Range Default
Customised
value
Anti heating cycles Central heating / C.H. anti-cycle timer set 0 ÷ 840
180
seconds
Heating ramp Set central heating ramp timer 0 ÷ 840
180
seconds
RT request delay Set delay timer requested by TA 0 ÷ 600 0 seconds
Solar delay Not used on this model 0 ÷ 300 0 seconds
Waiting time priority Not used on this model 0 ÷ 100 0 seconds
Antilegionella stop Sets anti-legionella end temp 0 ÷ 255
180
minutes
Boiler end of precedence Not used on this model
MENU/Service/Boiler/Circulator
Menu item Description Range Default
Customised
value
Mode
Sets the central heating / C.H. pump
operation mode
Interm. = in winter “mode” the pump
is managed according to the room
control request.
Interm.
Cont. = in “Winter” mode the pump is
always powered and is therefore al-
ways in operation
Max speed
Sets the maximum pump operating
speed in central heating / C.H.
1 ÷ 9 9
Min speed
Sets the minimum pump operating
speed in central heating / C.H.
1 ÷ 9 6
Delta t
This defines the type of speed control
of the pump in central heating / C.H.
Delta t = 0: head proportional to the
power supplied by the burner
15°C
Delta t = 5…25 : constant Delta t oper-
ation (at the set value)