en
12
User Manual Santiago Bemar
www.igloo.pl
It is recommended to make a break in the exploitation of the device once a week in order to clean its interior. Remove
the dirty water from the tank by opening the water out
fl
ow ball valve placed below the body of the device Fig.1/9 (p. 8).
Elements of device can corrode when improper used and maintenance. To avoid that please
follow the rules:
• Do not allow contact of the surface of the device with substances containing chlorine and / or baking
soda in different varieties, which destroy the protective layer and components of the device (also
includes various stainless steel)
During maintenance services it is necessary to pay attention not to damage the data place of the device
Fig.9 (p.12), which contains signi
fi
cant information for servicing organs and waste removal companies.
6. SERVICE
6.1. Fault identi
fi
cation and repair
In case of any dif
fi
culties during actuation of the
device or during its exploitation, please return
to these chapters in this manual, which explain
the performed operation. This aims to ensure
that the device is properly operated. If you still
experience dif
fi
culties, the following hints will
help you solve the problem.
The device is not working... – Make sure
that:
• Voltage and frequency in the network are
compliant with those recommended by the
producer
• The device is connected to the supply
network
• The main switch on the control panel is
turned on
• Temperature regulating knob is turned on
The device is operating, but the lighting is
off...– Make sure that:
• Lighting switch is turned on
• Bulb in the lamp is not burnt
The device does not reach the proper
temperature, the lighting is on...– Make
sure that:
• The main switch is on
• Temperature setting on the thermostat is
properly set
The device is not working, sound signalling
is activated...– Make sure that:
• The tank in the device is
fi
lled with water, in
case of low water level; add water until diodes
and sound signalling will be off.
• Serial number (NS)
• Production date
• Type (name of the device)
and
• Date when the device was
purchased
• Description of the problem
• Your exact address
and telephone number
(with the code number)
Data plate is placed at the back of
the device, in the right upper cor-
ner below the top Fig.1/13 (p.8).
6.2. SERVICE
IGLOO service telephone number: +48 (14) 662 19 56
or +48 605 606 071, e-mail: [email protected]
If after checking points described in chapter 6.1 “Fault identi
fi
cation and
repair” the device still does not work properly, please contact Technical
Service of the Igloo company, stating the data from the data plate Fig.10
(p.12):
Fig.10 Data plate
The above
fi
gure shows a demonstrative data plate and the
data stated on the plate are exemplary data, which are not
related with “Santiago B” device!
NOTE: IN CASE OF NOT OBSERVING THE PRINCIPLES ON CONNECTING AND USING THE DEVICE INCLU-
DED IN THIS MANUAL, THE PRODUCER SHALL RESERVE THE RIGHT TO RECEDE FROM OBLIGATIONS OF
THE GUARANTOR!!!
Information included in this document may be altered by “IGLOO” without noticing the user.
Copying the present manual without the consent of the producer is forbidden.
Images and drawings are of demonstrative character and may differ from the purchased device.
