IFM Ecomat 300 AC1318, Дополнительное руководство по устройству

Страница: 62 / 243

ifm Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15 2012-02-29
Function The fieldbus modules
62
Commands in the module 11
10646
The following table provides an overview of the available commands:
Command no. Description
1 read master flags
2 change operating mode
3 change current slave configuration
4 read projected slave configuration
5 change projected slave configuration
6 read current slave parameters
7 change projected slave parameters (default values)
8 read LAS (list of active slaves)
9 read LDS (list of detected slaves)
10 read LPF (list of slaves with periphery fault)
11 read LPS (list of projected slaves)
12 - reserved -
13 read telegram error counter of a slave
14 read configuration error counter
15 read AS-i cycle counter
16 change current slave parameters
17 - reserved -
18 - reserved -
19 Config all
20 - reserved -
21 save configuration in the flash memory
22 reset telegram error counter