ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Set-up
Basic settings of the fieldbus interface
221
10 Set-up
Basic settings of the fieldbus interface...................................................................................... 221
Set the parameters of the device .............................................................................................. 221
Store system parameters .......................................................................................................... 228
10715
This chapter shows you how to get the DeviceNet fieldbus interface started quickly
10.1
Basic settings of the fieldbus interface
10716
NOTE
The settings on the device must meet the following conditions:
The fieldbus address in the network must be unique.
Otherwise the following errors can occur:
No data transfer with the device possible.
Or the connected network will be completely inoperable.
The necessary settings of the fieldbus interface of the device can be made by means of the integrated
display and the four operating keys. In the menu [Fieldbus Setup] the user can make all the necessary
basic settings or view the present configuration:
[Menu] > [Fieldbus Setup] or:
[Menu] > [Quick Setup] > [Fieldbus Setup]
In any case the following parameters must be set on the unit for use on DeviceNet:
the fieldbus address
the fieldbus baud rate.
10.2
Set the parameters of the device
10859
10.2.1
Parameter setting of slaves in the controllerE
4550
Set the parameters of the slaves in the AS-i controllerE as described in the basic device manual.
