IFM Ecomat 300 AC1029, Основное руководство устройства

Страница: 93 / 280

ifm Basic Device Manual AS-i ControllerE M4 Target V15 2015-10-30
Operating and display elements Diagnostic LEDs
93
Diagnostic LEDs
LED
colour
LED out LED lit LED flashes
ASI1 [PWR/COM]
AS-i bus 1:
P o w e r
Com munication
Green
No supply for AS-i
bus 1
AS-i supply available;
at least 1 slave
detected on the bus AS-i supply available;
no slave correctly
detected on the bus
ASI1 [PROJ]
AS-i bus 1:
Proj ection
Yellow Operating mode active
Configuration mode
active; configuration
monitoring deactivated
Configuration mode
active; changeover to
protected mode not
possible because a
slave with the address
0 is connected
ASI1 [CONF/PF]
AS-i bus 1:
Conf iguration
P eriphery F ailure
Red
Configuration and
periphery ok
Projected and current
configuration do not
match Periphery fault
detected on at least
one connected slave
ASI2 [PWR/COM]
AS-i bus 2:
P o w e r
Com munication
Green
No supply for AS-i
bus 2
AS-i supply available;
at least 1 slave
detected on the bus AS-i supply available;
no slave correctly
detected on the bus
ASI2 [PROJ]
AS-i bus 2:
Proj ection
Yellow Operating mode active
Configuration mode
active; configuration
monitoring deactivated
Configuration mode
active; changeover to
protected mode not
possible because a
slave with the address
0 is connected
ASI2 [CONF/PF]
AS-i bus 2:
Conf iguration
P eriphery F ailure
Red
Configuration and
periphery ok
Projected and current
configuration do not
match Periphery fault
detected on at least
one connected slave
[24V PWR] Green
No 24 V operating
voltage 24 V operating voltage
available
---
[PLC RUN] Yellow
Controllere operates
as a gateway PLC program in the
controllere active PLC program in the
controllere stopped
[EthNet] yellow
no communication in
the Ethernet
LED flashes for each data package