IFM Ecomat 300 AC1029, Основное руководство устройства

Страница: 15 / 280

ifm Basic Device Manual AS-i ControllerE M4 Target V15 2015-10-30
System requirements Information concerning the device
15
3 System requirements
3.1 Information concerning the device
This manual describes the AS-i controllere family of ifm electronic gmbh

with master profile M4

with AS-i version 3.0 masters

with a firmware from version RTS 2.2

with the target from V.15.
3.2 Information concerning the software
The controllere operates with CoDeSys
®
as from version 2.3. The minimum system requirements of
this software are as follows:

CPU Pentium II, 500 MHz

working memory (RAM) 128 MB, recommended: 256 MB

free hard disc memory (HD) 100 MB

operating systems Windows
®
98 / NT4.0 / 2000 / XP

Windows
®
Vista is not yet supported!

CD-ROM drive
In the "programming manual CoDeSys ® 2.3" more information about the use of the programming
system "CoDeSys for Automation Alliance" is given. This manual can be downloaded free of charge
from
ifm's website at:
→
www.ifm.com > Select country/language > [Service] > [Download] > [Bus system AS-Interface]
3.3 Required accessories
In addition to a controllere you need the following accessories (not supplied) to run the system:

24 V power supply (e.g. order no. DN2011) and

one AS-i power supply per AS-i master (e.g. article no. AC1216)

as well as AS-i slaves.
Description of the corresponding fieldbus or the Ethernet programming interface
→ separate supplementary manual for this device manual
If you want to use the PC for configuration and programming you also need:

the software "CoDeSys for Automation Alliance" version 2.3 or higher

a programming cable (e.g. article no. E70320)

as well as a PC with serial interface.