ifm
Basic Device Manual AS-i ControllerE M4 Target V15
2015-10-30
Operation
Display of slaves with periphery fault (list)
186
13.6
Display of slaves with periphery fault (list)
Indication at which slave address the controllere found one (or several) slaves type A, B or S
(standard) on the bus with a wiring fault.
The LED [CONF/PF] flashes as soon as there is a periphery fault.
What is a periphery fault? Periphery faults depend on the used slaves and can have different causes.
Examples
:
A slave with analogue inputs is projected but does not receive a signal in the defined value range
on one of its enabled inputs (faulty electrical connection to the sensor).
External 24V voltage supply missing on one slave which needs it.
[MENU] > [Slave Lists] > select master > [Periphery Fault]
1. E26 ASi1
Generic Periphery fault
>
LED [CONF/PF] flashes
>
The display on the left appears instead of the
ifm
start screen:
→
periphery fault
► Press the key [MENU]
M
M
E
E
N
N
U
U
1/2
▲
!
▼
U
U
S
S
E
E
R
R
2.
Quick Setup
PLC Setup
Slave Lists
► Press [▼] to scroll to [Slave Lists]
O
O
K
K
1
▲
!
▼
E
E
S
S
C
C
3. Quick Setup
PLC Setup
Slave Lists
► Select [Slave Lists] with [OK]
O
O
K
K
1
▲
!
▼
E
E
S
S
C
C
