IEI Technology KINO-LX Скачать руководство пользователя страница 186

Страница: 186 / 197

Page 186

IEI® Technology, Corp

KINO-LX Motherboard

Step 1:

Step 2:

Step 3:

Step 4:

Select

“

Create RAID 0 Striping for Performance”

. Use the arrow keys to

highlight

Create RAID0 Striping for Performance

and press

NTER

. A flashing

‘S’ appears on the

Drive Menu

where the member drives to be included in the

RAID 0 array can be chosen.

Select RAID array drive members

. Use the space bar to select members of the

RAID array. The flashing cursor changes to a lower case ‘s’ once any of the

connected disk drives has been selected. Follow the same method to select

another member drive.

Confirm

. The

Create RAID0 (Y/N)

confirm box appears. Press

Name the array

. Enter a nickname for the created array. Upper and lower case

alphabetic, numeric, space, and underscore characters are all applicable for

naming an array.

Step 0:

Содержание KINO-LX






































































































































































































Результаты поиска

Содержание KINO-LX

Отзывы:

IEI Technology KINO-LX, Руководство пользователя, Страница: 186 / 197

Результаты поиска

Содержание KINO-LX

Отзывы: