IEI Technology KINO-LX Скачать руководство пользователя страница 102

Страница: 102 / 197

Page 102

IEI® Technology, Corp

KINO-LX Motherboard

First Boot Device

[Default: Floppy]

Second Boot Device

[Default: HDD-0]

Third Boot Device

[Default: LS120]

Using the default values, the system first looks for a floppy disk to boot from. If it cannot

find a floppy disk, it boots from an HDD. If both The floppy and the HDD are unavailable,

the system boots from a CDROM drive.

Boot Device configuration options are:

Floppy

LS120

HDD-0

SCSI

CDROM

HDD-1

ZIP100

USB-FDD

USB-ZIP

USB-CDROM

USB-HDD

LAN

Disabled

Boot Other Device [Enabled]

Use the

Boot Other Device

option to determine whether the system uses a second or

third boot device if the first boot device is not found.

Disabled

The system does not look for second and third boot

devices if the first one is not found.

Enabled

(Default)

The system looks for second and third boot devices if the

first one is not found.

Содержание KINO-LX






































































































































































































Результаты поиска

Содержание KINO-LX

Отзывы:

IEI Technology KINO-LX, Руководство пользователя, Страница: 102 / 197

Результаты поиска

Содержание KINO-LX

Отзывы: