IEI Technology KINO-LX Скачать руководство пользователя страница 103

Страница: 103 / 197

Page 103

KINO-LX Motherboard

Swap Floppy Drive [Disabled]

The

Swap Floppy Drive

option is effective only in systems with two floppy drives.

Selecting

Enabled

assigns physical drive B to logical drive A, and physical drive A to

logical drive B.

Enabled

Assigns physical drive B to logical drive A, and physical

drive A to logical drive B.

Disabled

(Default)

Default physical/logical drive assignations.

Boot Up Floppy Seek [Disabled]

Use the

Boot Up Floppy Seek

option to enable the BIOS to determine if the floppy disk

drive installed has 40 or 80 tracks during the POST. 360K FDDs have 40 tracks while

760K, 1.2M and 1.44M FDDs all have 80 tracks.

Disabled

(Default)

BIOS does not search for the type of FDD drive by track

number. Note that there is no warning message if the

drive installed is 360K.

Enabled

BIOS searches for a FDD to determine if it has 40 or 80

tracks. Note that BIOS cannot tell the difference between

720K, 1.2M or 1.44M drives as they all have 80 tracks.

Boot Up Numlock Status [On]

Use the

Boot Up Numlock Status

option to specify the default state of the numeric

keypad.

Off

The keys on the keypad are not activated.

(Default)

Activates the keys on the keypad.

Содержание KINO-LX






































































































































































































Результаты поиска

Содержание KINO-LX

Отзывы:

IEI Technology KINO-LX, Руководство пользователя, Страница: 103 / 197

Результаты поиска

Содержание KINO-LX

Отзывы: