IEI Technology KINO-LX Скачать руководство пользователя страница 104

Страница: 104 / 197

Page 104

IEI® Technology, Corp

KINO-LX Motherboard

Gate A20 Option [Fast]

Use the

Gate A20 Option

option to set if the keyboard controller or the chipset controls

the Gate A20 switching.

Normal

The keyboard controller does the switching.

Fast

(Default)

The chipset does the switching.

Typematic Rate Setting [Disabled]

Use the

Typematic Rate Setting

configuration option to specify if only one character is

allowed to appear on the screen if a key is continuously held down. When this option is

enabled, the BIOS reports as before, but it then waits a moment, and, if the key is still held

down, it begins to report that the key has been pressed repeatedly. This feature

accelerates cursor movement with the arrow keys.

Disabled

(Default)

Disables the typematic rate.

Enabled

Enables the typematic rate.

Typematic Rate (Chars/sec) [6]

The

Typematic Rate

option can only be configured if the

Typematic Rate Setting

enabled. Use the

Typematic Rate

option to specify the rate keys are accelerated.

(Default)

6 characters per second

8 characters per second

10 characters per second

12 characters per second

15 characters per second

20 characters per second

24 characters per second

Содержание KINO-LX






































































































































































































Результаты поиска

Содержание KINO-LX

Отзывы:

IEI Technology KINO-LX, Руководство пользователя, Страница: 104 / 197

Результаты поиска

Содержание KINO-LX

Отзывы: