Part 1 – Introduction
20
Power Cable Connection
Connect the power cable to this port. This NVR does
not feature a separate power on/off button and will
turn on the moment power is supplied.
AUDIO IN
AUDIO OUT
VGA OUT
HDMI
eSATA
NETWORK
VIDEO IN
NC C NO AR I G
RS -485
- +
A/1 A/2 A/3 A/4 G
Tx Rx
RS -232
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
1
3
2
4
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
A
C
E
G
B
D
F
H
100-240V~
•
Organize the power cable so that it will not cause
people to trip over or become damaged from
chairs, cabinets, desks, and other objects in the
vicinity. Do not run the power cable underneath a
rug or carpet.
•
The power cable is grounded. Do not modify the
power plug even if your power outlet does not
have a ground contact.
•
Do not connect multiple devices to a single power
outlet.
Factory Reset
AUDIO IN
AUDIO OUT
VGA OUT
HDMI
eSATA
NETWORK
VIDEO IN
NC C NO AR I G
RS -485
- +
A/1 A/2 A/3 A/4 G
Tx Rx
RS -232
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
1
3
2
4
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
A
C
E
G
B
D
F
H
100-240V~
Located next to the Audio Out port on the rear of the
NVR is a switch that, once activated, will reset the
NVR to all its initial factory settings.
A factory reset will clear all NVR settings configured
by the user.
You will need a straightened paper clip to access the
factory reset button.
1
Restart the NVR (turn off and then on).
2
Once the front panel LEDs start to flash, insert
a straightened paper clip into the factory reset
switch hole and press the switch.
3
Press and hold until you hear 2 beeps from the
NVR's internal buzzer.
4
All NVR settings will be returned to their factory
values once you remove the paper clip.
