Part 2 - Getting Started
34
Advanced Settings
While in PTZ mode, select the menu button and then
select the
Advanced PTZ
icon to display the
menu shown below. This menu lists
Speed
,
Auto
Pan
, and other advanced PTZ camera control options
available for the camera. Options that are not available
for the selected PTZ camera remain inactive.
You can use the mouse to control PTZ cameras.
Left-click on the mouse and drag to move the
camera in the desired direction and use the mouse
wheel to zoom in/out.
While in PTZ mode, place the mouse pointer close
to the bottom edge of the screen to display the PTZ
Tools window.
PTZ Camera Pan and Tilt
Zoom In/Out
Focus Near / Far
IRIS Open / Close
Set / Move to Preset
Advanced PTZ
•
The exact PTZ protocol supported by the camera
must be specified in order to use the NVR's PTZ
controls.
•
Drag and drop to reposition the PTZ Tools
window.
•
Select the
icon to hide the PTZ Tools window.
Event Monitoring
When an event occurs, the NVR automatically displays
the channel linked to the event and shows the
icon on the system status area on the upper right
portion of the screen. To use the Event Monitoring
feature, navigate to
Display Setup > OSD
and enable
Event Monitoring
. Event Monitoring remains in effect
throughout the entire
Linked Recording Time
. After
that, the NVR will return to the previous screen if a
new event does not take place. Pressing the
Layout
or a
Camera
button before the end of the
Linked
Recording Time
reverts the system to Live mode.
Covert Camera
Use this feature to assign
Covert Camera View
permissions.
Navigate to
Camera Setup
>
General
and designate
cameras as
Covert 1
or
Covert 2
.
•
Covert 1
: Hides images from the camera in Live
mode but does indicate the camera's title and
status via icons.
•
Covert 2
: The camera is indicated as being inactive.
Images from the camera are not shown. Camera
title and status icons are not shown.
