4
Safety Precautions
Information contained in this section of the manual serves to prevent accidents and property damage through
proper use of the product. Please read the following instructions carefully and follow them at all times.
Warning
Failure to comply can lead to severe injury or even death.
Installation
Make sure to turn off the
product before installing it
and to use a dedicated power
outlet.
Presents overheating, fire, and
electric shock hazards.
There are high-voltage
components inside the
product. Do not attempt
to open the cover or
disassemble, repair, or
modify the product.
Presents fire, electric shock, and
physical injury hazards.
Use the product in
conjunction with protective
equipment that minimizes
damage from power outages
and lightning strikes.
Presents fire, electric shock, and
physical injury hazards.
Make sure to turn off the
product before expanding the
system (such as installation
of additional cameras). Do
not under any circumstance
connect a signal line while
the product is in operation.
Presents fire, electric shock, and
physical injury hazards.
Connection ports on the rear
of the product protrude out
slightly, and placing the back
of the product too close to a
wall will cause the cables to
bend excessively and even
break. Maintain a distance
of at least 15cm between the
back of the product and the
wall it faces.
Presents fire, electric shock, and
physical injury hazards.
Do not use the product in
an excessively hot (40˚C or
above), cold (5°C or below),
or humid environment.
Presents a fire hazard.
