Idex Wright Flow Technologies RTP Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 58

P
P
a
a
g
g
e
e
7
7
2.0 Introduction.
2.1 General.
RTP TM rotary lobe pump is manufactured by Wright Flow Technologies Limited
a unit of the IDEX Corporation.
This manual includes all the necessary information for RTP
TM
pumps and
should be read prior to beginning installation, operation, or maintenance.
Should you require any additional information regarding the RTP TM pumps
contact Wright Flow Technologies Limited or their local authorised distributor
(refer to section 2.2).
When asking for assistance, please provide the pump model and serial
number. This information can be obtained from the pump nameplate, which is
located on the side of the pump gearbox cover, see fig 2. Should the
nameplate be unreadable or missing, the pump serial number is also stamped
on either side of the rotorcase, see fig 3.
If the system or product characteristics are to be changed from the original
application for which the pump was selected, Wright Flow Technologies
Limited or their authorised distributor should be consulted to ensure the pump
is suitable for the new application.
2.2
Wright Flow Technologies Limited Distributors.
Wright Flow Technologies Limited distributes its products internationally via a
network of authorised distributors. Throughout this manual where reference is
made to Wright Flow Technologies Limited, service and assistance will also be
provided by any Wright Flow Technologies Limited authorised distributor for
RTP
TM
pumps.
2.3
Receipt and Storage.
Upon receipt of the pump, immediately examine it for any signs of visible
damage. If any damage is noted, contact Wright Flow Technologies Limited or
your Wright Flow Technologies Limited distributor and clearly mark upon the
carriers paperwork that the goods have been received in a damaged condition,
with a brief description of the damage.
If the pump is not required for immediate installation then it should be stored
in a clean, dry environment. It is recommended that storage temperature
should be between –10°C and 40°C (14°F and 105°F).