Idex Hale Sam, Руководство по эксплуатации, установке и обслуживанию

Страница: 43 / 141

27
activated/selected. However, the onboard tank can only supply a finite amount of water so the
pump operator must transition to a pressured (or draft) supply as soon as possible.
The display is the result of the ITL–40 message traffic via the Green CAN bus. When a communi-
cation (or other) error exists the onboard tank level display turns Red.
4.2.1.5
Mode Control Area/Section
Touch the Manual Mode button (see Figure 20, page 23) to exit Auto Mode. When the button is
touched a popup confirmation screen appears to prevent inadvertent deactivation of Auto Mode.
Figure 28 shows the Manual Mode confirmation popup.
To continue SAM Auto Mode, touch the NO button or touch the YES button to exit Auto Mode and
navigate to the MANUAL VALVE CONTROL screen which also activates PSI MODE on the Pump
Controller. See Section 6.3.2, Manual Mode (page 82).
To return to SAM Auto Mode, on the MANUAL VALVE CONTROL screen, touch the ACTIVATE SAM
AUTOFLOW button. To continue touch the YES button or touch the NO button to remain in the
MANUAL VALVE CONTROL screen. See paragraph 6.3.2.5, Return To SAM Auto Mode, page 87.
Note if changes were activated in Manual Mode the discharge control area/section perimeter re-
tains the orange color (from Manual Mode) to indicate the last setting was set in Manual Mode
until an Auto Mode change is active for the valve.
Figure 28. Manual Mode Confirmation Popup
4.2.1.6 SAM Information Center Area/Section
The SAM information center (see Figure 20, page 23) is a read only field that displays the current
message(s), active alerts, or active warnings.
4.2.1.7
User Assignable Quicksets Area/Section
The user assignable quicksets area/section displays up to four buttons, each provides instant
activation of the labeled line (discharge) at the preset pressure displayed in the button. To
quickly activate the desired Quickset simply touch that button and drag it to the discharge target
icon (PUSH TO PUMP) (See paragraph 6.2.2.1 or 6.2.2.2 [page 58] for setting up Quicksets, or
paragraph 6.3.1.3 [page 71] for operating using Quicksets.)
4.2.2
SAM Control Center Customizable/Configurable Items
The SAM system utilizes passwords to control access to the SAM Control Center customiza-
ble/configurable items. Selected customizable/configurable items are accessible via passwords
enabled by a USB key. These customizable/configurable items are typically for use by an OEM,
apparatus builders, or a Hale FAST center. For details, reference the Technical Manual for SAM
(FSG-MNL–00211). Other customizable/configurable items require end user access (AHJ and/or