Idex Hale Sam, Руководство по эксплуатации, установке и обслуживанию

Страница: 111 / 141

95
Figure 112. Selecting A CAFS Capable Discharge
FROM THE VALVE X SCREEN, THE OPERATOR MAY SELECT WATER ONLY, FOAM ONLY,
OR CAFS. TO SELECT WATER ONLY, SWIPE THE PSI PRESET (RIGHT-HAND SIDE OF THE
ICON GROUP) TO THE TARGET. TO SELECT FOAM ONLY, SWIPE THE FOAM ONLY PRE-
SET TO THE TARGET. TO SELECT CAFS, SWIPE THE (WET, MED, OR DRY) CAFS PRESET
TO THE TARGET.
D. Touch desired CAFS preset button. (All CAFS available discharges are labeled
with one of the following words: DRY, MED, WET, or FOAM and are located to the
left of the icon group.) See Figure 113.
Figure 113. Activating A CAFS Preset
E. Drag button to target (SET PRESSURE).
F. Release button (remove finger from screen).
The SmartCAFS system powers on and activates preset #1. The associated type and concentra-
tion of foam solution is discharged.
Operate CAFS from the SmartCAFS Control Display from this point, reference UV SmartCAFS In-
stallation and Operation Manual (P/N FSG-MNL-00157).
6.3.3.4.3
Changing A CAFS Discharge To FOAM ONLY
To change a CAFS discharge to FOAM ONLY, perform the following.
A.
On SAM Control Center Home screen, touch desired active CAFS discharge. Dis-
plays Valve X screen displays. See left-hand side of Figure 114.